Everything You Need To Know About Different Types Of Locking Mechanisms For Folding Hunting Knives

Most folding hunting knives have a spring-assisted open or close system. This means you will need to hold the knife against something for it to closed. This is referred to as a spring lock.

This system is common because it works well and is easy to setup and remove. It also stays consistent over time, as you would use it more and wear it down from that initial setup.

Some locking mechanisms have another kind of closure such as a button or clasp. These require you to physically push or release for the knife to open or close. This requires more effort and skill to use properly.

Liner lock

A less common type of locking mechanism used in folding hunting knives is the liner lock. While this method is not typically used in hunters’ knives, it can be a nice touch to have if you are into that kind of look!

Like the thumb track method, the liner lock relies on pressure applied by the user to turn a wheel which inserts into a slot on the knife. When integrated, this slot closes and locks the knife into position.

Paralleled with opening and closing of the knife is their use with elevation change. When exposed more than covered by leather, changing location can expose sharp edges or make them difficult to hold if they are not locked in place.

With some blade styles working with only one type of locking mechanism, there are no detailed answers here! Read on for some more information on these lesser-known mechanisms.

Push button lock

The push button lock is one of the most common folding hunting knife locks on the market. It is very simple to use and deploy, allowing you to get into your weapon quickly if needed.

Like most locks, the push button has its pros and cons. The pros are that it is easy to operate, they last longer than some types of strike tools, and they are cheap and easy to steal.

The cons are that they can be difficult to set and disarm, you have to reach for them when you need them, and they may not be the best choice in an emergency or self-defense scenario.

Some buttons have a different shape or location on which they are inserted for different knives with different locking mechanisms.

Flipper lock

A flipper lock is a very rare feature on folding hunting knives. Most have a conventional locking mechanism. This feature makes it easier to open the knife in an emergency.

A flipper lock is a special feature that changes the geometry of the blade as it is folded, resulting in a lockout. When closed, this feature makes the knife look more like aolphine swordfish or sika stropsticks.

In order to use a flipper lockknife in an emergency, you must learn how to properly fold and open the knife. Many people just take of the heel and raise the middle of the knife, but that does not work for some reason.

You must first learn how to properly set up your knife for folding and opening.

Throat lock

A throat blade is the longest part of a hunting knife. It is the portion of the blade that is thicker at the front. This thicker portion of the knife’s blade is called the point.

Throat blades are pretty unique due to their long point. Because of this, it can be difficult to match up a pattern or style of knives. As a result, this type of knife is more expensive than a other types.

Because these knives have longer points, they may be more difficult to fold and carry in one shape or form. In order to use these knives, you must either add or remove length from your knife.

Ringlock

The term ringlock can mean several things. One is a method of locking the blade back into the folding handle. Another is a method of preventing the blade from coming open while in storage.

Ringlock is a method of locking the folding knife back into the handle. There are three main types of ringlock: pin, spring, and lock types. The pin type is the most common type used in folding knives.

The spring type can be used if you do not want to use a button or button-like instrument to release the lock. The easiest type of ringlock to use is a pin-type ringlock. Just push and hold onto and off sharply when wanting to unlock or fold the knife!

To put on a spring-type ringlock, first make sure you have enough room to put your thumb on both sides of it. Then, wrap your finger around it and try pulling! You should be able to let go just enough for it to go on.

Axis locking mechanism

The axis locking mechanism is one of the more unusual mechanisms found in folding hunting knives. These are a little bit of a curiosity to look at, but not every folding hunting knife has it!

The axis locking mechanism was developed by German knife maker Carl Feltz. He originally designed it for pocket knives, but later adapted it for folders as well.

This special design uses three pins that hold the blade in place. The middle pin is curved and solid, while the other two are flat and open-top. When folded back, these pins align and lock the blade into place.

When opening the knife, the middle pin must be pulled out until it clicks, which allows you to fold back the blade.

Button lock

The button lock is one of the most common locking mechanisms used in folding hunting knives. It is also one of the more well-known types.

The button lock was originally developed for use with wallets and purses. You would need a specialized wallet or purse that could unlock with your normal knife blade.

Now that technology has evolved, and many non-utility knives have some sort of button lock, it is still the majority of folding hunting knives. Button locks can be either basic or fancy, standard or special. Some have added moving parts to make them more exciting to open and close.

This article will talk about some basic facts about button locks for folding hunting knives.

Slipjoint

The term slip joint refers to a method of knife locking. It refers to the way the knifeblade is attached to the handle.

The term means two things: first, it refers to a method in which the knifeblade is held at an angle by a lever on the handle; second, it refers to a style of slip joint where one side of the knifeblade is held in place by a stopcock on the blade and another stopcock on the tang.

Both methods result in some degree of wobble while holding and cutting. The difference is that with slip joint knives, you must be more aware that one end of the blade will fall off if you let it slide down when you pull it out.

Because these kinds of knives have some degree of wobble, be careful how far you pull your trigger when doing rapid target shooting or fighting organisms.


by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *