What Kind Of Locking Mechanisms Does Benchmade Use For Its Folding Knives?

Folding knives are a very popular type of knife. Whether you are looking at celebrity carry-forwards or obscure obscure models, there is always something new and exciting to try.

Benchmade is one company that designs folding knives. Their flagship model, the Gripta, is one of the best selling Benchmade folding knives. The Gripta comes in several models with different blade shapes and materials, making it a very unique knife.

Another popular model by Benchmade is the UST-10N. This knife has an unsharpened tip that can be used as a grip surface when folding the knife open.

Push button lock

When folded, the Benchmade Cascade Folding Knife has a push button lock system. This system requires you to hold the knife in an open or closed position to activate or deactivate it.

The push button is located on the top of the knife and functions as a release button as well as a lock mechanism. When pressed, it locks the blade in place and opens when released.

This is a very simple mechanism to use and set up. With just a little bit of practice, you will have this down!

With the Benchmade Cascade Folding Knife, you do not have to worry about putting too much pressure on the lock when folding and unfolding the blade.

Detent ball lock

When a Benchmade folding knife is opened, the blade must be placed back in place by a pin orSynopsis of procedure thatsecurelyretains the knife in place.

The linebackde detent ball is positioned in the blade between the two cutting edges. When you open a knife with one hand, the other hand can pull the blade out easily by pushing on the ball and releasing it.

When you want to lock it back into place, you pull on one end of the ball and push on the other end to release the Higgins-like pin. Then slide your finger along the cut-resistant edge and pull up! That secureensuresthe Knife Stays In Place.

Flipper

The other unique feature of the Benchmade Flipper is its flip up, flipper action. This makes it possible to open the knife quickly and smoothly!

When deployed, the flipper can be held against the skin in one of two ways. You can either hold it vertically on your skin or horizontally on a surface.

Either way, when you push down on the blade, it will fold up into a crescent shape and stick out at an angle. When you pull it back out, it will open back up!

This feature is very useful because if someone gets you with a punch or kick, you will have an easier time putting some pressure on the blade and still have control over how to use your knife.

As stated before, these knives are rather large so this feature may not be necessary for some people.

Intellislip®

Intellislip is a coating found on most folding knives. It contains microscopic grooves that help the knife blade slide easily together and apart.

Intellislip also helps prevent the knife blade from getting kinked or twisted, which prevents easy opening and efficient cutting.

Many folding knives now have an intellislip coating as well as a hard rubberized coating to protect the blade. The combination of these two covers makes it more challenging to remove from the box- you’ll have to be more careful when opening it!

Some knives do not have an intellislip coating but still are effective in their own right. These are the ones that lack some kind of protection against moisture and heat, making them either vulnerable to breaking or being partially melted due to use.

Arc-Action®

Arc-Action® handguns owe their design feature, the arc-action notch, to the demand for an easier time holding and firing the gun.

Until now, most firearms held in a front- or rear-hand grip with the palm facing toward you is going to have a more conventional pistol grip with a backside that looks like a magazine.

With the notch, users can hold the gun with their left hand using only an index finger on the thumb, and a little rest on the other finger. With this arrangement of hands, users can fire the gun by just placing it on their hip under theirprintlncment.

Users can also choose to hold the arc-Action® at an angle or upside down! This is due to its unconventional grip shape.

Assisted Opening Lockback

While most folding knives have an assisted opening mechanism, the Assistedopeninglockback (AOL) is a little different. The lockback is a dial that you turn to open the knife.

This dial can be turned left or right to initiate the close process. When turned fully right, the knife becomes locked in place and cannot be opened except with the correct side of the dial.

The side with the dial cannot be oiled or pampered with, it has to be used instead. The only way to release the knife is to turn the lockback completely off or remove it.

Some assist their knives with Computer Aided Design /Computer-Aided-Designing(CAD/CAD) software, which allows them to design a relief on the blade that looks like an opening but is actually a re-grasp of another part oftheknife.


Posted

in

, ,

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *